You are currently viewing How to Configure Netgear Orbi Access Point Mode?

How to Configure Netgear Orbi Access Point Mode?

Have you owned the Orbi router and want to set it up as a Orbi  Access Point Mode? If your answer is yes, but wondering about how to do this. Then this is the last stop for all your brainstorming.

In this, you will be provided with the easy-to-follow guide on how to set up the netgear orbi access point mode. Netgear Orbi is a mesh WiFi hardware that provides a single WiFi network for your entire home. With this, you can have one network name and password and you don’t have to change network when you move around your home. But many users don’t know how to enable Orbi Access .

If you are also from the same category, then you arrived at the correct destination. Well, configuring the netgear orbi as an access point isn’t a complicated job. And also doesn’t require too much workaround. Setting up the Orbi in access point mode will extend the range of your current wireless network. The following instructions will walk you through configuring your Orbi access point mode. 

What is Orbi Access Point Mode?

The Orbi access point mode lets you use your Orbi router’s WiFi instead of the WiFi on your existing router. In the access point mode, your Orbi router assigns IP to your WiFi device attached to your Orbi. 

This puts them on the same network. With this, you can use WiFi on your Orbi router instead of the WiFi on your current network by setting up your Orbi router as an Orbi access point. The Access Point acts as a hub that links all the stations together. It functions as the focal point for transmissions, which improves the communication range for wireless users. 

Steps to Set up Netgear Orbi Access Point

If you are unable to configure Orbi access point mode, then the following steps will definitely help you. Go through the following instructions to set your Orbi device as an access point. Here are the steps you need to follow. 

1. Turn your Netgear Orbi On

Before proceeding further, you have to plug the Orbi router into a power outlet and press the power button. Now wait for some time and let the LED become solid green.

2. Connect the WiFi Devices

Once the device is on, take an ethernet cable. Now connect one end of it to the internet port of the Orbi and another end to the LAN port of the existing router. While connecting ensure that the connection isn’t loose on wired devices.

3. Access Orbilogin.net

Now you need to get access to your laptop. For this open any web browser and check that its cache, cookies, and browsing history are cleared. Then in the search bar, enter Obrilgin net and click on Enter.

4. Log into Orbi

After clicking on enter, you will see the Netgear Orbi administrative page. On that, you have to enter the default username and password and click on Log in. Now a basic home screen will appear.

5. Choose the Option AP Mode

Now to enable the Netgear Orbi access point mode, you have to choose Advance and then Advanced Setup option. After that, click on the Router/AP Mode button and choose AP mode radio. 

Now wait for the page to adjust and choose the IP settings from the options “Get Dynamically from the Existing Router” or “Use the Fixed IP Adress.” In this, you will successfully be able to set up your Orbi in AP mode. 

How to Troubleshoot Common Issues while Configuring Orbi Access Point Mode

Setting up the Netgear Orbi into the Access Point mode isn’t a complicated job. However, at times many users encounter many problems while setting up the netgear access point mode. 

 

But the good thing is that all those issues are curable and can be fixed in a few simple steps. Below we have mentioned some problem-solving resolutions to rectify those problems. 

1. Check the Power Socket

Before jumping to further fixes, first, you need to check that the wall socket into which the orbi device is plugged isn’t damaged. Ensure it is working properly and getting enough power supply. If in case, it is damaged, then consider plugging the device into another socket.

2. Update the Internet Browser

The next you need to check is your internet browser is updated to its latest version. An outdated browser can also prevent you from setting up the netgear access point mode. Also, make sure the cookies and cache are cleared.

3. Verify the Ethernet Cable Connection

If you are using a damaged ethernet cable to connect your wireless device. Then you need to replace the damaged ethernet cable with a new one to avoid any problems while setting up the AP mode.

4. Use the Default IP Address

If orbilogin.net refuses to help you log into the netgear Orbi Router. Then consider using the default IP address for the same. 

5. Relocate the Netgear Orbi

Another method is to ensure that the Orbi router is placed nowhere cordless phones, washing machines, baby monitors, fish tanks, mirrors, and Bluetooth speakers. As these devices’ signals interrupt the Orbi connection.

Sum up

Hope the above guide will help you with how to configure netgear orbi access mode. To set up the Netgear Orbi in an access point mode, all you need to do is follow the above steps as given. 

In this, you will also get to know What is orbi access point mode shortly. But if in case, this does not help you in setting up the access point mode. Then try to get in touch with Orbi Login professionals, they will deliver you with complete assistance.

Leave a Reply